Tema: Actualizaciones Setool Box

v1.0 FINAL

- added standalone support for reset operation, alternative security bypass for next chipsets:

supported s1 aid 0001,0002,0003.
supported a1/a2 cid 16,29,36,49,50,51,52,53,80

Code:
s1 omap
s1 locosto
s1 neptune
db 200x
db 201x
db 2020
db 3150
db 3200
db 3210
db 3350

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]

setool v1.01 FINAL

- fixed a2 cid80 support

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]

Setools Software Paid Updates V1.02

- added preliminary support for a2 cid26 phones (s5320 at the moment) at the moment, network unlock possible by flashing special firmware from support samsung s5320 should be connected with "9+#" pressed in order to enter boot mode. all other functions supported without notable exceptions.

- added a2 db3150,db3200,db3210 emptyboard fill support. you need special cable in order to successfully write OTP chip, +7.5v should be applied to DCIO (charger pin, pin 12)


activation required in order to use that update.
just unpack 1.02.rar in existing setool2 directory
( setool2.ini not included in dist anymore, so your password/username will not be overwritten)
and run activator.exe.
i strongly advice users to run only activator.exe which included in v1.02 archive or from below

Link de Activador: [Sólo los usuarios registrados y activos pueden ver los links. ]
Link V1.2:[Sólo los usuarios registrados y activos pueden ver los links. ]

La Activación tiene un Costo de 20 Créditos

[Sólo los usuarios registrados y activos pueden ver los links. ]

Setools Software Paid Updates V1.03

- broken db2000,db2010 red cid49 support unsigned mode, fixed.

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]

Setool v1.04

- added support for samsung m5650 phone.
it is absolutely necessary to select correct model, otherwise phone will be trashed. always add main part of firmware first when flashing.
- added unlock codes calculation for samsung s5320,m5650 phones.
select correct model, check signed mode, press unlock.
it is absolutely necessary to select correct model, otherwise nothing good will be done.
thx to zoio,GeniuSShadoW for testing.
- a2 emptyboard fill procedure now works as intended
- fixed support for unlock a2 cid80 phones, when signature server offline
- fixed few minor bugs
- updated drivers

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]

Setool v1.05

- some newer ODM firmwares were not parsed properly, fixed
- few cosmetic fixes

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]

setool v1.06

- added support for qsd8250-based semc phones (x10 at the moment).
flashing,gesture lock reset,trim area read/write is standalone and free
please note, high quality usb cable required to work with x10.
network unlock is server-based and paid.
x10 network unlock disabled for public at the moment.

- added support for a2 cid81 phones.
flashing,user lock reset,gdfs area read/write is standalone and free
network unlock is server-based and paid.

- few cosmetic fixes

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]

Setool v1.07

- fatal flashing bug fixed.
odm phones, pda phones was affected.
greatly sorry for inconveniences.

- memory consumption decreased while flashing x10 phones.

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]

Setool v1.08

- x10mini support added.
yes, network unlock still unavailable for public.
do not ask us for special x10-enabled accounts - they not exists.

- different bugfixes

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]

Setool v1.081

- increased server communication timeouts, can help in case of timeout errors
- different cosmetic bugfixes

Link:[Sólo los usuarios registrados y activos pueden ver los links. ]