Tema: Cuidado con nuevo chip s5230

Hola compañeros, se nos esta advirtiendo de un nuevo FLASH CHIP que traen los nuevos Samsung Star el cual no soporta los viejos Firmware y que de cargarselos dañaran severamente los equipos y que solo pueden repararse con JTAG, aqui la advertencia que da soporte de UFS/HWK:

Warning About New Hardware and New Flash Chip Used.
To Avoid Damage of Mobile Sets, at First use [Mobile Info] Button.

Here is Log from Set with New Flash Chip:

PING: OK, COM82 - MODEM
Product : GT-S5230
Software: SS_21331_Platform_SW_Release_SI1.3.10_V5.0
Software: S5230XPJI1
Regions : Europe
Language: de,en,es,fr,it,nl,pl,pt,tr
Release : 2010 September Rev: 1
Hardware: MP 0.710 <<<<<< NEW HARDWARE ID
Cal Date: 2010.06.25
IMEI: 352672-04-xxxxxx-0
S/N : RDNZ619xxx
BTID: D4 E8 B2 44 12 F7

UNID: 70910000681030
FLID: MT29C2G24MAK(S5230) <<<<<< MICRON Flash Chip ID
SECC: -
CCOD: XEU

MICRON Flash Chips is not Supported by Old Firmware!
Support starts from middle of the 2010.
Visually, without disassembling mobile you cannot identify the Flash Chip.
Valid Firmware Code must be: S5230XP JE 4 , for example (JE)
New Firmware also supports older Samsung Flash Chips.

BOOT Change with Old BOOT Files causes Permanent Damage and
at the moment can be Repaired Only by using JTAG boxes.

To Read Unlock Codes from New Hardware Sets Must Select
[BL Internal (RJ45)] Mode when do [QCDI Info]
Default Mode is [BL External (RJ45)]

Also this can be Valid for Other BroadCom based Mobiles,
so Every time Check with [Mobile Info] before BOOT Change and Flashing.

Segun lo que se nos dice debemos usar los Firmware (flashes) que empiezen con "XP".


Saludos ¡¡